Principles of arrangement of systems for automatic irrigation of the site

It is always difficult to organize manual watering of a summer cottage, especially if its area is not so small. The irrigation system on the site will solve one of the most pressing problems - lawns, flower beds, beds will always be properly moistened, and you will not puzzle over how it is more convenient to water the garden without spending a lot of effort. You will have the opportunity to relax more in the country without wasting time on many hours of manual watering.

What are the automatic irrigation systems? They are divided by sprinkler and drip. The operation of the mechanism depends on the indicators of air humidity sensors - the system turns off when it rains, when the air humidity is high. The irrigation system works by the hour, each zone in the garden has its own irrigation duration, which you set yourself.

Features of the sprinkler system

The auto-irrigation sprinkler system will irrigate the plot according to the specified schedule. The best time for its installation is autumn, at which time the risk of damaging the plants is less. Auto-irrigation will allow you to replace hoses and buckets in the garden with small fountains, thanks to which you can grow a uniform, beautiful lawn, a luxurious flower bed. With a correctly and carefully thought-out installation of the system, all mechanisms are hidden underground or camouflaged, so that the installation will not affect the appearance of the landscape in any way. The system will water the garden according to the set program even during your absence, and you will not worry about the condition of the plants.

If you are fond of landscape design, planting plants that need regular abundant watering, the arrangement of automatic irrigation on the site will be the best option for you - the garden will be "under supervision", even if you are away, you will not need to hire a gardener. The system is not cheap, but it will definitely pay for itself

The main thing in such a system is the mechanism control panel - a mini-computer that controls in accordance with the selected program. It will turn off the system in rainy weather, the pump operates in automatic mode. A portable weather station monitors the weather. The remote control can be installed both in the house and on the street, the program is set for a certain period - the number of irrigated zones in the garden is determined, the number of irrigations per day.

The pipes are supplied to the solenoid valves, the remote control gives the command to the valves to open or close, thus water is supplied to the irrigation heads. Watering the site is carried out by a sprinkler (or sprinkler head). Sprinklers are installed underground when the system is pressurized, watering is done through retractable nozzles.

The sprinkler with a closed valve is inoperative in the ground, when the system is pressurized, the nozzle extends and the sprinkler head starts to work in the set mode

For watering a small area, fan heads are mainly used, they do well with watering a flower bed. They work within a radius of five meters. For the irrigation heads, special nozzles are made, thanks to which you can carry out root watering, irrigation at a remote distance, etc.

Unidirectional spraying in this case is used to water the lawn near the path. Throw length adjusted to cover the width of the lawn

Rotary sprinklers are no less common; they are equipped with a circular rotation mechanism and allow watering large areas, therefore they are mainly used in parks, for watering lawns of sports grounds, etc. When watering young plants, large-sized plants, and the root zone of shrubs, bubble nozzles are used.

This rotating sprinkler is designed to irrigate large areas of lawn. Water spray evenly in all directions for complete watering

Water is supplied to the sprinkler heads at different angles, with different strengths, resulting in either directional irrigation or irrigation with water spread over different distances. For fan and rotary sprinklers, the irrigation intensity is different, therefore they are not installed in the same zone. If irrigation will be carried out not from the water supply, you will need to buy a pumping station as well.

Pivot irrigation is good for a small flower bed or lawn. The best time for watering is morning or evening, in the afternoon, due to extreme heat, burns may remain on the leaves of plants

Advice. Irrigation systems for summer cottages are produced by various companies today, when choosing, pay attention to the popularity of the company, reviews, the quality of the installation work performed (and they cost almost the same as the system), and, of course, the guarantee.

Let's say you have already selected the system you want. Before starting the installation, you must have a site plan, a dendroplane (which will indicate the planting sites of plants, their varieties, varieties, location on the site), as well as the location of the source from which you will take water for irrigation, the location of the power point.

Think about where the sprinklers need to be located, other than the main areas, what they should be - this could be care of a remote or hard-to-reach area, an area near paths, etc. The cost of installation depends on the consideration of these factors.

An example of the location of the automatic irrigation system in the country - with proper organization, not a single site in the garden will be left without irrigation. Experts will select the right equipment for all garden areas

When is the best time to install an autowatering system? The most convenient way to do this is when you have already prepared a layer for sowing lawns, planted all the plants, made paths. A well-executed installation will guarantee a long and successful operation of your system.

Drip irrigation for a vegetable garden and a small plot

For many summer residents, this particular choice is more preferable - it is very economical, the installation of a drip irrigation system will cost much less. If the plot is small, you do not need to irrigate large areas, so sprinkler irrigation is generally not needed here.

Automatic drip irrigation scheme for the garden - water is distributed from a large barrel for each garden bed separately. This ensures perfect watering for every crop.

With drip irrigation, water (it can be supplied together with fertilizers) is applied in small doses to the root zone of the plant. For the winter, the system is not dismantled, you just need to blow through the pipeline with compressed air before the onset of the winter period, and start the system after winter storage. The use of soft hoses made of frost-resistant plastic allows the devices to be left for the winter, they can winter both in the ground and in the open field.

Drip irrigation can be used anywhere - in a vegetable garden, in a garden, in a greenhouse or in a greenhouse. If the controller is connected to the system, it will turn off irrigation when it rains, and generally work according to the set program, just like when an automatic sprinkler system is operating.

Related article: Automatic drip irrigation of the lawn: bringing water to hard-to-reach areas

The autowatering system is connected to the water supply system only by a tap for filling the tank, it is an autonomous structure that includes a pump, a tank, an automation, a system of dividers and pipes. Experts select the pump model and tank volume, taking into account the volume of the system. But you can choose the dividers and automation yourself - the choice here depends on the financial situation and the frequency of maintenance of the site.

Advice. To prevent droppers from flooding the plants, the container is installed at a low height - up to one and a half meters. It is convenient to use a barrel for 150-200 liters, tightly covered with a lid.

When using a drip irrigation system, the saving of irrigation water is 50%. The method allows you to avoid burns on the leaves of plants, as is sometimes the case with sprinkler irrigation during hot times of the day. The risk of plant disease with fungus, late blight is practically excluded. If necessary, you can adjust the degree of soil moisture at any point.

Drip irrigation provides full hydration of the root zone, the ability to add fertilizers, mineral additives allows you to grow an excellent harvest, providing crops with ideal conditions for growth and development

The system is ideal for growing vegetables, it is no coincidence that it was invented in the 50s of the last century in Israel - a country with a hot arid climate, when there was an acute shortage of water. The ability, together with water, to make the necessary fertilizing with microelements, fertilizers allows you to collect good yields.

Today, autowatering can also be used at home. For example, if you grow tropical plants, large-sized plants such watering will contribute to their full development.

Summer residents collect drip irrigation systems with their own hands, but if you are not confident in your abilities, it is better to purchase a ready-made system - it is simple and reliable in maintenance, and will pay for itself very quickly.

The use of irrigation systems allows plants to constantly be in favorable conditions, such mechanisms solve many very important tasks, allowing your garden to look beautiful and well-groomed, the garden - to give excellent yields, and you - to have more time to enjoy your vacation in the bosom of nature.

  • Print

Rate the article:

(6 votes, average: 4.3 out of 5)

Share with your friends!

Automatic irrigation systems on the site: sprinkler versus drip

Design is the most important, main and responsible stage. Highly qualified engineers are ready to perform high-quality design of any complexity.

We are the official suppliers of the best equipment for landscape irrigation such companies as HUNTER, RAIN BIRD, IRRITROL, and accessories from the renowned Italian manufacturer IRRITEC.

Installation of SAP takes place in several stages:

  • installation of spray nozzles, pipelines
  • installation of the controller,
  • solenoid valves and rain or moisture sensors
  • cabling
  • connection of the system to water supply sources
  • installation, piping of the pumping station
  • commissioning works.

For the efficient operation of the SAP, it is required not only to correctly carry out all the commissioning work, but also to carry out the appropriate seasonal work on the conservation and re-entry of the system. In autumn, the pipeline networks should be blown out with compressed air, and after winter frosts, the system should be started in spring.

Huge practical experience, responsible approach, bringing the assigned tasks to their logical conclusion, full service and maintenance, powerful resources. We are not “all-rounders”, but a serious, developing engineering company.

Cost is the design value. There is no template. One and the same area at different objects in monetary terms may differ significantly from each other, because depends on dozens of different factors and special cases. To find out the cost of an irrigation system, you need to make a project.

Miracles do not happen and free cheese is usually in a mousetrap. You can count in different ways. It all depends on the depth of the developed project, on its detailing, on "little things" that are not trifles and affect not only the performance and reliability of the irrigation system as such, but also the convenience of its maintenance and repair. Also, the cost is influenced by the availability of the possibility of adjusting or expanding the irrigation system in the future without global destruction at the facility, depends on the quality of the equipment used and on the quality of the irrigation itself (guaranteed absence of non-spill dry zones) and these are not all factors and reasons. And so, returning to the question - some "conscientious" colleagues can deliberately or through ignorance or banal carelessness make an incorrect or problematic project in advance with the expectation that in the future it may significantly increase in price or turn into a chronically problematic question without an answer. By contacting our company, you initially receive a guaranteed high-quality product, and if your budget is severely limited, then we can work out an acceptable more simplified version together with you.

Ideally, the installation of the irrigation system itself is carried out after the completion of all construction work on the site, the design of the geometry of the flower beds, the delivery of land, the laying of paths, the planting of trees, perennials, etc. Those. installation of an irrigation system is the last final stage on the territory. Naturally, before that, it is necessary to make and approve the project, provide, if necessary, embedded sleeves under the paving stones and paths, determine the water intake point, the power supply point and the location of the main components of the system.

You can connect, but there will be no watering. Pipes of too small diameter and with low throughput are usually taken out. Also, the city network pressure or the domestic pump may not be enough. The irrigation system needs higher rates than the standard domestic water supply for a small house. The exact figures are determined by the project.

If it meets the requirements of the project, you can.

If the well has a sufficient flow rate of water, it is possible. The phrase - "I throw the hose into the garden and I have a pump pumping for 8 hours and the water does not run out" - does not always indicate the sufficiency of the flow rate. If there is not enough water, it may be necessary to install a storage tank.

First of all, with understanding for yourself what you need and what you want to get in the end result. The next stage is the selection of partners for the implementation of the plan, design of landscaping, landscaping and, of course, automatic irrigation.

Can. This will reduce the cost of the system, but there will be some inconveniences in operation (you will be forced to turn on all the watering taps with timers in your hands every day, you will worry about the safety of landscaping during your long absence from home, for example, on vacation, etc.) ... Automation can be added painlessly in the future, if such a possibility is foreseen and stipulated in advance.

You can call by phone and we will advise you.

Design of automatic irrigation systems

Initial visit of a specialist to the site:

  • Carrying out the necessary measurements of the territory
  • Measurement of pressure and flow rate of a water supply source
  • Drawing up the technical task
  • Irrigation Consulting

* - Plus transportation costs depending on the distance. When ordering system installation or purchasing equipment - FREE OF CHARGE

Automatic irrigation system design,

  • Creation of scale plot diagrams with all buildings, paths, plantings
  • Drawing on the schemes of the routes of the location of pipelines and drip lines, places of installation of sprinklers
  • Designation of irrigation zones, indicating the type of equipment used and parameters for hydraulic calculation
  • Hydraulic calculation of the irrigation system
  • Selection of the necessary equipment
  • Drawing up a detailed estimate indicating all purchased equipment and the final cost of all types of work on this project
  • At the request of the customer, an explanatory note is provided with a description of the system, instructions for use, recommendations for maintenance, etc.

The cost depends on the area of ​​the site, the complexity of the system and the amount of equipment.

** - When ordering the installation of the system, the project is FREE.

Installation of automatic irrigation systems

In the complex of works on installation and commissioning

  • Site marking
  • Laying of pipelines in trenches, corrugated pipes with control cables
  • Installation of valve boxes with drainage cushion
  • Installation of water sockets on the drain
  • Installation of solenoid valves
  • Sprinkler installation
  • Installation of pumping equipment
  • Installation of a storage tank with piping and automation
  • Assembly / installation of a water distribution unit
  • Installing the Irrigation Controller
  • Checking the system for leaks
  • Assembly and installation of the power panel of automation
  • Installing a rain sensor, humidity or weather station
  • Laying drip lines
  • Commissioning of irrigation system equipment

The exact cost can be known only after preliminary calculation of the system, because will depend on the size of the irrigated area, the number of irrigation equipment, the length of the pipelines, the degree of overlapping of irrigation radii and other conditions.

*** - execution by the customer is possible

Seasonal maintenance of the automatic irrigation system

Preservation of the automatic irrigation system

The cost of seasonal maintenance work is determined based on the complexity of the system, the size of the site, the amount of equipment and the distance from the city.

Starting the automatic watering system before the season

The design of an automatic irrigation system begins with the creation of a technical task. There are the following ways to prepare it:

  • Draw a plan of the site yourself and send it (formats: DWG, JPG, PDF, TIFF) for calculation by e-mail.
  • Completion of a special questionnaire by the customer or his representative. Based on the answers, a design specification is being prepared.
  • Departure of a specialist to the object for conducting reconnaissance on site and collecting technical information.
  • Transfer to the design department of a package of documents, including a plan of the facility in scale or with drawing of reference markings in electronic form (DWG, JPG, PDF, TIFF, etc.) and containing the following necessary materials:
    • Dendroplane with a list of plants available or planned for planting on the site
    • Plan of paths and blind areas
    • Utility layouts, including garden lighting cables, integrated security cables, storm and drainage systems, plumbing, septic tanks, etc.
    • Elements of landscape architecture built or being prepared for implementation, such as gazebos, sculptures, fountains, pergolas, etc.
    • Locations of other facilities - sports, playgrounds, outdoor pools, etc.)
    • Information about the water source located on the territory or in the immediate vicinity of the site. The place of connection to the water source for powering the irrigation system.
    • It is necessary to indicate the main parameters of the water source:
      • Dynamic water pressure is the water pressure (meter of water column / bar / Pa / atm) in relation to the flow rate (l / min m3 / h)
      • Water temperature
      • Water composition is important when choosing a filtration system
  • Network type:
    • Single-phase - 220 V
    • Three-phase - 380 V
    • Dedicated power (kW)
    • Availability and parameters of ground loops
  • Possible places of installation of the storage tank on the site.
  • Elevation plan with marked retaining walls, stairs, etc.
  • The composition of the soil, in the case of post-bed formation of the soil, in order to achieve an even distribution of moisture on the site at the design stage
  • Do I need to water the paths on the site?

After the formation of the technical task and the compilation of all the necessary information for the design, our specialists begin to develop the project.
Based on the above parameters, the type of sprinklers and their placement on the site plan are selected. The hydraulic calculation of the automated irrigation system is carried out. The total water consumption by sprinklers, the optimal diameter of the main pipeline of the system, the number of solenoid valves is calculated. The type of control controller and weather sensors is determined. The location of the pumping station and storage tanks is approved.

After the final calculations, a package of working documentation is formed, consisting of a graphic and a text part. The graphic part includes an album of drawings. The drawings show:

  • Sprinkler layout with displayed irrigation radii and sectors and water flow for each sprinkler
  • Trench routing plan for laying pipes and control cables of the irrigation system
  • Plans of individual system nodes

The text part consists of:

  • Explanatory note to the project (A4 format)
  • Hardware Specification

The composition of the automatic irrigation system

Types of irrigation installations and equipment

How to make automatic watering in the country? At the stage of drawing up a project for irrigation of a land plot, the owners should decide on its type and learn more about what irrigation installations exist. It is possible to mount an irrigation system even when a green lawn, flower beds, shrubs and trees are already located on the site. The craftsmen of the "ZEMLECHIST" company carefully remove the top layer of the earth, lay pipes and lay the sod in place. Of the main types of irrigation installations, the following are distinguished:

Sprinkler systems. At the heart of such a complex is the supply of water under pressure, which is sprayed over a certain area through special devices in the form of sprinklers (sprinklers). When installing, it is important to take into account 2 main points:

  • correctly determine the installation points of the sprinklers, taking into account the fact that the irrigation radii of adjacent nozzles must completely overlap. This will eliminate the formation of dry areas after watering.
  • choose the right types of sprinklers that can spray water in a circle, only in a certain square / rectangle, or have variable geometry.

When choosing sprinklers and places for their installation, they take into account the recommendations of our company's specialists, who make an accurate calculation taking into account the configuration, area and geometry of your site.

Drip. The principle is that water is supplied in a metered manner and exclusively to the roots of plants. Most often it is used for watering plants in vegetable gardens and flower gardens. Among the advantages, one can single out economical water consumption and the absence of the need for strong pressure, since it can be supplied by gravity from a container located at a height of 1.5 - 2 meters.

To organize such an irrigation system in the country and garden area, drip tapes are used, which are tubes with holes through which water seeps drop by drop. When choosing a dropper, the pitch of the holes must be taken into account (they can be located at a distance of 10, 20, 30 and 50 cm from each other). An important part of the drip line is a filter that cleans the supply water, eliminating the risk of clogging the holes to the drip tape.

Underground. Quite an interesting way of irrigation, the principle of operation of which is similar to drip. A tube with slit or round holes is buried at a depth of 10 to 20 cm, depending on the type of plant. In practice, such a system is difficult and inconvenient to maintain. For it, you should use a special drip tape that protects the holes from clogging, as well as a strong structure to eliminate the risk of crushing the tube under the weight of the earth.

Regardless of the irrigation system you choose, we use only certified installations of American manufacturers Rainbird and Hunter. Installation is carried out in accordance with the requirements of the technical regulations.

Automatic watering in the country: Types, installation and debugging [+ Video 2019]

Automatic watering is indispensable for giving

Autowatering in the country is a progressive, complexly arranged system that requires careful and painstaking care. The more acres planted, the more thoughtful this option should be, providing the crop with the proper water content.

Automatic watering will make it easier to rest in the country

Automatic watering in the country is necessary even for the lawn

Automatic irrigation rain technology in the country

Varieties of automatic irrigation

Auto-irrigation in the country is the best opportunity to simplify your life in a summer cottage or garden area and an impressive savings in money. In the case of rational distribution of the liquid for irrigation, you can save the consumption of this raw material. The practical side of the issue implies the presence of three basic types of irrigation systems.

  1. Rain technology assumes the flow of water from above. Thus, the plant leaves are irrigated, dust is removed from them, while the soil remains unchanged. This type is the most effective because it is as close as possible to natural moisture.
  2. The drip version is the most economical, since it does not involve the consumption of water on the surface of the plant or on the soil that is nearby. In this case, the roots are not affected either - it turns out that the soil is fully moistened as much as necessary. This type of irrigation is an ideal solution for those with a large garden area and a limited amount of water.
  3. The subsoil form of autowatering for summer cottages and vegetable gardens implies saturation of the earth with moisture, and the top layer remains dry. That is, the water comes from the inside, and this form of interaction helps to protect the stems and leaves of plants from decay, and also prevents the growth of weeds.

Rain irrigation technology has efficient irrigation

In general, the system can operate on an automatic and mechanical basis. In the first case, you do not need to monitor the amount of water and the frequency of watering the beds. This is due to the fact that all functions are clearly adjustable and subject to automatic control.

On a note! This type of installation is designed to last over 10 years, however, manufacturing will require a considerable amount of money. Sometimes a semi-automatic scheme is used, which starts the option in the required time mode. Autowatering in the country can be organized with your own hands, but for this you will have to perform a set of rational measures to prepare for work.

Making your own drip irrigation function

The essence of the method consists in supplying water with a storage tank under a certain pressure indicator, and the pipes are equipped with special droppers, which are located in the immediate vicinity of the root system. The disadvantage of operation is that normally the water supply is carried out only to the nearest droppers, while the rest of the elements suffer from a lack of water.

Advice! With an increased pressure indicator, the first nearby elements will have an excess of moisture, so it is necessary to develop a high-quality pressure system.

Drip Irrigation Laying Scheme

If it was decided to use this particular irrigation system, you should pay attention to several of its constituent elements:

  • Pipeline system, presence of distributing units. Traditionally, preference is given to products made of metal plastic.
  • Valves - these components are required to regulate the water supply process, that is, if the limit is exceeded, the valve prevents subsequent supply.

  • Counter - this element is needed to obtain information about the amount of water that is spent. Without it, problems can arise in determining the amount of water supplied to plants.

  • Water filters are presented in great abundance, so it will not be difficult for the user to choose the right one based on the quality of the water supplied. With a high level of contamination, it is worth giving preference to products that have an automatic flushing option.

Automatic irrigation strainer

  • Fertilizer units - they can be specially mounted separately from the tank and serve for high-quality application of liquid and granular fertilizers. The fertilizer will react with the water in the pipes and be delivered to the plant through a dropper.
  • Connecting and damping mechanisms must be used in places where pipes branch.

So, the answer to the question of how to make automatic watering in the country is quite simple, therefore it is necessary to rationally ensure the organization of this system, having previously drawn a plot diagram and depicting beds with plants on it. This will allow you to count the number of connectors and drippers required.

Drip irrigation system accessories

General tips and tricks for installing the system

Automation is an overly complex design that significantly simplifies the life of the gardener. However, with self-automation of irrigation, difficulties can arise.

Automatic system elements often include pumps, pressure control devices, timers, and control units.

Often, gardeners trust the implementation of these options to professionals, and when deciding on independent work, you should also contact a specialist.

In order for the system to function smoothly and not fail, several basic conditions must be observed:

  • Installation of additional indicators of soil moisture. In this case, the timer will work, regardless of the level of natural precipitation, which is required to prevent waterlogging of the soil.
  • Any installation of the system requires a specific plan, and this requires a sketch of the site and schematic designation of the location of the sprayers or drip elements.

For autowatering, it is very important to lay the pipes correctly

  • After the complete production of the circuit, you can carry out the markup in accordance with the plan. For this, pegs and colored cords are traditionally used.
  • To provide the system with water, you will have to acquire a good pump, which can be of a drainage type, or can be supplied with axles and pistons. The choice is based on the amount of water needed for irrigation.

Installation of an autowatering system

The automatic irrigation system in the country will save you from excessive worries about work and functionality.

Advice! Do not worry about the quality of watering - with a rational installation, everything should happen in the best possible way. But you should periodically check and replace the filter elements. You will also need to regularly change the batteries.

Do-it-yourself watering-sprinkling

Automatic irrigation rain technology

  • Sprinkling is an automatic system often used for watering lawns, but this method is also relevant for owners of vegetable gardens, summer cottages, garden plots. If the work takes place on an automatic basis, maintaining a balance between the frequency of irrigation and the degree of moisture absorption plays an important role. This principle has a huge plus - it does not disturb the soil cover. Because of the strong water jets, no unnecessary holes remain, so the root system has the right to maintain its integrity. An important task for the owner of such a system is that it is necessary to provide full control of the pressure and intensity of the jets in order to avoid soil waterlogging.

To mount rainwater irrigation equipment on a personal site, it is necessary to ensure the conduction of pipes and the distribution of irrigation systems for an even flow of water throughout the site.

Advice! In the case of replenishment of bushes and trees with water, the mechanisms should be fixed higher. An important part of the entire system is 20 mm pipe elements, and you also need to pay attention to the taps themselves and spray nozzles with nozzles. Irrigation should be uniform, otherwise there is a possibility of drying out or rotting of the root system.

If the decision was made to do autowatering in the country with your own hands, you are five minutes away from a competent answer to this question. A rational approach to business will allow you to achieve optimal results and create a high-quality working system without much difficulty.

Convenient and simple option for irrigating the lawn in the country

Autowatering in the country: basic rules and principles of watering

For the efficient operation of the irrigation system, you need to follow some basic rules:

  • Regardless of the degree of automation of the irrigation system, you should not completely distance yourself from this process. The absence of loosening in irrigation makes this process minimally effective, and a crust forms on the soil surface, which prevents moisture from penetrating inside. It must necessarily be loosened, since the soil is saturated with the necessary substances.
  • It is undesirable to use cold water for system operation. It is best to give preference to water heated in the sun. This is due to the fact that cold exposure has a negative effect on the root system as a whole.
  • It is necessary to distribute crops over the site so that it becomes possible to divide it into zones in accordance with the degree of humidity: plants that love water are placed on one side, and those that tend to grow in an arid climate on the other. This contributes to the simple organization of the irrigation system.
  • If irrigation work is carried out directly from the hose, the water jet should not be directed strictly to the root, as this can lead to serious damage to the root system and provoke decay. An important role goes to the uniformity of irrigation, that is, water must be absorbed into the soil everywhere.
  • When there is a need to retain moisture in the soil, you can cover it in the holes with straw. In this case, the earth will remain more moist, since a barrier will be created that prevents instantaneous evaporation of the humid environment.

Advice! If a period of drought has come, watering should be abundant, but not frequent. The fact is that with frequent intake of liquid, but shallow exposure, the roots will not receive sufficient moisture. As a result, a crust forms, which becomes a barrier to water saturation of the roots.

If a decision is made to buy automatic irrigation for the country, it is necessary to competently approach its selection and installation!

Watch the video: Amazing Garden Ideas!

Previous Article

Growing Guava In Containers: How To Grow Guava Trees In Pots

Next Article

Cutting Back A Plane Tree: How To Prune A London Plane Tree